CUSTOM MADE HOSES AND FLEXIBLE TUBES

At Redfluid we manufacture hydraulic hoses of any type with very short delivery times. 

A hydraulic hose is a flexible pipe within the hydraulic environment with two terminals, one at each end. The terminals are generally metallic in carbon steel or stainless steel and can have many shapes and standards. There are hundreds of types of flexible hoses materials depending on pressure, temperature, and service fluid.

We have a wide range of fittings in all the usual shapes and threads and quick connection systems that adapt to hoses.

We manufacture ultra high-pressure hoses up to 4000 bar.

Do you need more info? Here you can download the technical datasheet of this product.

Characteristics

Pressure

Different series depending on the required service pressure, up to 4000 bar.

Diameters

For lines from ¼ to 4 ”in diameter.

Connections

BSP or Cylindrical GAS (DIN 259), SW (ANSI B16.11); BW, SW OD, Flanged, Mixed, Quick Connections, MP, HP, JIC…

Terminal Materials

Carbon Steel, 316 / 316L Stainless Steel, and on request, Duplex, Super duplex, Hastelloy, Monel, among others.

Hose material

Depending on the requirements, the hoses can be made of rubber, 304 stainless, 316 stainless, PTFE with stainless steel outer mesh, polyamide (PA), polyoxymethylene (POM), polyvinylidene fluoride (PVDF) or polytetrafluoroethylene (PTFE). 

Depending on the field of application, the hose is made of 2, 4, 6 or 8 coiled layers of high-strength wire. Materials used for the outer jacket include polyamide (PA), polyurethane (PUR), or polyvinylidene fluoride (PVDF).

Customize

If you need other connections, materials, or other modifications, we can tailor it for you. Make your inquiry here.

Types of CUSTOM MADE HOSES AND FLEXIBLE TUBES

We manufacture different types of CUSTOM MADE HOSES AND FLEXIBLE TUBES:

We manufacture each flexible tube according to your needs much faster than you imagine. We need the following information to be able to send a budget and manufacture them:

  • Working pressure (normally in bar)
  • Work temperature (ºC)
  • Fluid (Needle, oil, steam, gas …)
  • Diameter of terminals
  • Terminal material (316, 304, carbon steel, duplex …)
  • Terminal connection standard (female union nut, male BSP cone 60º…)
  • Hose material (Rubber, Coated PTFE): If you do not know, leave it blank and we will propose the best solution for your working conditions)
  • Hose diameter
  • Hose length
  • If you want it to carry some type of textile protection, springs, anti-whiplash, etc.

Benefits

Wide range of flexible tubes with hoses from different manufacturers.

Hose preparation, pressing and testing including cleaning before delivery.

Assembly of flexible tube fittings and other joining components by us, guaranteeing maximum tightness

Pressure tests up to 4000 bar with 2.5: 1 or 4: 1 safety factors.

Standard capping of hose ends.

Similar products

Do you need more info?

Here you can download the technical sheet of CUSTOM MADE HOSES AND FLEXIBLE TUBES.

Place an order

If you wish, you can also contact us to ask for more information or place an order:

RedFluid® 2021. All rights reserved.