Pressure Vessels, Distributor, and Condensing Pots

We manufacture pressure vessels called distributors, Condensate Pots, Collectors, or sampling manifolds.

We have A105 and 316 in stock with 3 and 4 connections, but we manufacture them in all sizes, shapes, and different materials to adapt to any situation. These conditions include high pressures, high temperatures, dangerous gases/fluids, etc. 

Upon request, we can manufacture the collectors under the European standard PED 2014/68 EU, the American ASME VIII, including the possibility of the “U” seal or both.

Distribution manifolds for gas, steam and air include various applications, from avoiding condensation to the evacuation of unwanted fluids or the diversion of fluids to secondary circuits.

Do you need more info? Here you can download the technical datasheet of this product.

Characteristics

Pressure

Different series depending on the service pressure required, up to 400 bar.

Diameters

For lines from ¼ to 10 ”in diameter.

Connections

NPT (ANSI / ASME B1.20.1), BSP or Cylindrical GAS (DIN 259), SW (ANSI B16.11); BW, SW OD, Flanged ANSI B16.5 or EN 1092, Mixed.

Materials

Carbon Steel, 316 / 316L Stainless Steel, Brass, Duplex, Super Duplex, Hastelloy, Monel, 321, F11, P22, A335 P91

SCH

Any SCH from SCH10, SCH40, SCH80, SCH160, or SCHXXS.

Finishes

Painted, Galvanized, Zinc Plated, Sandblasted, Polished…

Also

We carry out non-destructive tests such as X-rays of welds and / or penetrating liquids.

Types of Pressure Vessels, Distributor, and Condensing Pots

We manufacture different types of Pressure Vessels, Distributor, and Condensing Pots:

● Measure: 2 ”, 3” and 4 ”
● Materials: A 106 GR. B – SCH. 80 or 3 ”AISI 316 – SCH. 80
● Connections: 3, 4 and 6 NPT threaded connections or SW welded.
● Capacity: up to 2100 cm2

Upon request, they can be manufactured in other diameters, schedules and number of outlets.

Benefits

Condensate pressure vessels (also known as seal vessels or condensation drip vessels) are welded vessels that allow instruments and valves to connect in line with the pipeline to enable sampling the line and retaining condensation.

The welds of our pressure equipment are periodically tested within the verification system of our manufacturing process and the welders are homologated in all types of welding applied to manufacturing.

We have the machinery and knowledge for the manufacture, tests and variety of surface treatments. We carry out non-destructive tests such as X-ray radiographs of welds and / or penetrating liquids.

100% of the pots we manufacture are hydraulically and helium tested according to the PED standard or optionally ASME VIII.

Ask for a quote

Form in Products "Familias" for RFQ in EN

Similar products

Do you need more info?

Here you can download the technical sheet of Pressure Vessels, Distributor, and Condensing Pots.

Request a Quote or Order

If you wish, you can also contact us to ask for more information or place an order: